How To Fix It Yourself

Microwave Ovens
Room Air Conditioners
Wall Ovens
There is an "F-Code" showing in my display.
Amana offers a wide variety of gas and electric ranges and wall ovens. The features and benefits are specific to individual models. Listed below are some possible explanations for service codes that may appear in the display of electronic control models. Codes may differ for individual range or wall oven models. Please refer to your Owner's Manual for specific display information for your particular model.
  • F0 – shorted or sticking push pad or key
  • F1 – pad malfunction
  • F2 – high oven temperature
  • F3 – temperature sensor malfunction
  • F4 – temperature circuit malfunction
  • F5 – control malfunction
  • F6 – control malfunction
  • F7 – shorted or sticking push pad or key, or door lock malfunction
  • F8 – control malfunction
  • F9 – door lock malfunction, or door not completely closed
  • FF – door lock malfunction
  • FFF – control malfunction
To clear the code from the display, press the CANCEL or CLEAR pad, or disconnect the electrical supply for approximately three minutes. If the code reoccurs, contact an authorized Amana service representative. An authorized servicer can be located by clicking on the "Customer Service" link referenced to the left and then "Service & Repair."
Important Note:
Be sure to follow specific, published user-repair instructions, such as these, when you are attempting to service or repair any part of your range. If the instructions don't make sense to you or you aren't sure how to perform them, please call an authorized Amana service provider for assistance.
Do not repair or replace any part of the appliance or attempt any service unless specifically recommended in published user - repair instructions that you understand and have the skills to carry out.